Installed Cost Range
The $14,000 to $26,000 range covers more than asphalt. A complete estimate should account for excavation, aggregate base, compaction, hot mix placement, and finish work.
Guides
Understanding the Cost Factors for a 2000 Square Foot Asphalt Driveway
A 2000 square foot asphalt driveway typically costs $14,000 to $26,000 installed, based on a national range of $7 to $13 per square foot for excavation, base material, and hot mix asphalt placement. Goodyear Asphalt explains how soil conditions, pavement thickness, drainage, and site access can move a local estimate within that range.
Quick Summary
- Budget $14,000 to $26,000 for a straightforward 2000 sq ft installation at $7 to $13 per square foot.
- Materials typically account for $1 to $5 per square foot, while labor and equipment add $3 to $10 per square foot.
- Residential pavement commonly uses 2 to 3 inches of asphalt over a 4 to 6 inch compacted aggregate base.
- Stable soil and good access help control cost; steep grades, tight access, drainage corrections, or difficult subgrade push it higher.
Three Numbers That Shape the Estimate
Cost and Site Factors
For 2000 sq ft, aggregate, binder, and hot mix asphalt total roughly $2,000 to $10,000. Equipment mobilization, labor, grading, access, slope, and drainage determine much of the remaining cost.
Estimate Scope Checklist
Compare excavation depth, base thickness, compaction, asphalt thickness, number of lifts, drainage work, equipment access, and surface finishing before comparing totals.
What to Inspect Before Comparing Quotes
Caliche and Subgrade Excavation
Excavation through gravel, old concrete, unsuitable soil, or Goodyear-area caliche. This hard, calcium-carbonate-cemented layer can require heavier equipment than ordinary dirt removal.
Compacted Base and Asphalt Lifts
Aggregate base compacted to roughly 95 percent of maximum dry density, a benchmark referenced from Arizona Department of Transportation and Maricopa Association of Governments specifications. Clear layers make it easier to compare a passenger-vehicle driveway with a heavier-load design and see why weak compaction can lead to early cracking or rutting.
Slope, Drainage, and Equipment Access
How a steep grade, narrow approach, or drainage correction changes the work area. These conditions can add excavation, equipment time, and finish work even when the square footage stays the same.
Goodyear Cost and Timing Snapshot
Arizona Tearout Benchmark
Regional cost reporting places Arizona tearout-and-reinstall work at an average of $3.35 per square foot, with a $2.50 to $4.20 range. Full new-driveway work with excavation and base preparation runs closer to $7 to $13 per square foot.
Heat and Paving Window
Spring and fall avoid summer heat above 110°F. Surface temperatures can exceed 150°F, shortening the workable window before hot mix asphalt falls below compaction temperature.
Monsoon Drainage Risk
Monsoon season runs from June through September. Flash flooding can damage poorly graded subgrade, so drainage corrections belong in the scope when the site needs them.
Maintenance Horizon
A properly installed driveway can last 15 to 20 years with sealcoating every 2 to 3 years. Goodyear's over 300 sunny days a year make UV-driven binder oxidation and timely maintenance especially relevant, while sealcoat application typically costs a fraction of regular repairs.
Installed Cost by Driveway Size
| Driveway Size | Square Footage | Estimated Installed Cost |
|---|---|---|
| 20 × 20 ft | 400 sq ft | $2,000-$5,000 |
| 20 × 40 ft | 800 sq ft | $5,600-$10,400 |
| Standard layout | 1,000 sq ft | $7,000-$13,000 |
| Larger layout | 1,500 sq ft | $10,500-$19,500 |
| Guide question | 2,000 sq ft | $14,000-$26,000 |
| 200 ft long × 10-12 ft wide | About 2,000-2,400 sq ft | $14,000-$31,200 |
| Extra-large layout | 3,000 sq ft | $21,000-$39,000 |
What the 2000 Sq. Ft. Price Includes
A complete installation starts by removing gravel, old concrete, or unsuitable soil to reach stable subgrade. It then includes grading, aggregate base placement, compaction, hot mix asphalt, and surface finishing. An estimate near the middle of the range assumes straightforward residential work with good access and stable soil.
Why Quotes Move Toward the High End
Goodyear grew from 95,294 residents at the 2020 census to an estimated 118,186 in 2024, adding new driveways, subdivisions, and expanding commercial sites. Even so, the price of a specific driveway depends on site conditions: expansive clay pockets near washes, caliche subgrade, steep grades, tight access, drainage corrections, added thickness, and material choice can all increase the scope.
Common Follow-Up Questions
Is 2 inches of asphalt enough? It is the minimum acceptable compacted thickness for a passenger-vehicle driveway over a properly compacted 4 to 6 inch aggregate base. Trucks, RVs, or trailers call for 3 inches in two lifts-a binder course and a surface course-while commercial parking lots typically require a minimum of 3 to 4 inches under Maricopa Association of Governments standard details.
Plan the Scope
Ready to Compare an Asphalt Estimate?
Share the driveway square footage, expected vehicle loads, base condition, access limits, slope, and drainage concerns. A detailed estimate should make excavation, material, thickness, compaction, and finish work clear before paving begins.